Grease-It™ Release Agents
- Grease-It™ II
A film forming, PVA release agent that can be sprayed or brushed-on to just about any surface and is water soluble. - Grease-It™ IV
A sprayable, polymeric silicone release that rapidly cures to form an excellent shine. In many cases, multiple releases may be obtained. - Grease-It™ WAX LT
A liquid wax release agent that is brushed-on and buffed-off to release epoxies, urethanes, metals, sealed wood, etc. - Grease-It™ WAX P
A hard, paste wax release agent that is brush-on and buffed-off to release epoxies, urethanes, metals, sealed wood, etc. - Grease-It™ FDG
A sprayable, food & drug grade release that rapidly cures to form an excellent release. It is made for applications that require Food Grade materials. - Grease-It™ V
A sprayable, paintable, polymeric release that rapidly cures to form an excellent release. In many cases, multiple releases can be obtained. Often used in production applications.
Grease-It Selector Chart
| Grease-It II | Grease-It IV | Grease-It V | Grease-It FDG | Grease-It WAX L | Grease-It WAX P | |
|---|---|---|---|---|---|---|
| Type | Modified PVA Barrier Coat | Non-Silicone Release | Paintable Polymeric Release | Food & Drug Grade Paintable Release | Liquid wax | Paste wax |
| Viscosity | 60 cps @ 25˚C | Spray Can | Spray Can | Spray Can | Liquid | Paste |
| Specific Gravity | .96 | NA | NA | NA | .8 | .8 |
| Color | Green | Clear | Clear | Clear | Clear | Tan |
| Dry Time between coats | 3-6 min. @ room temp. 1-2 min w/hot air heat | 10-20 seconds | 10-20 seconds | 10-20 seconds | 5 min. | 5 min. |
| Required number of coats | 4 coats applied in different directions | 1-2 coats | 1-2 coats | 1-2 coats | 2-4 coats | 2-4 coats |
| Application Method | Spray or Brush on | Spray Can only | Spray Can only | Spray Can Only | Brush on or Wipe apply | Brush on or Wipe apply |
| Description | Film forming barrier coat release for porous and non-porous surfaces | Non-Silicone release for non-porous surfaces | Paintable Polymeric release for non-porous surfaces | Release for applications that require a Food & Drug grade release. Paintable. | Liquid wax release for non-porous surfaces | Paste wax for non-porous surfaces |
| Advantages | Water soluble. Does not transfer to the casting. Sprayable and brushable. | Easy to use spray can. Good for all epoxies, urethanes, & polymer alloys. | Easy to use spray can. Good for difficult to release epoxies, urethanes, & polymer alloys. Paintable | Easy to use spray can. Good for all epoxies, urethanes, & polymer alloys. Paintable | Easy to use. Reliable, can be buffed | Easy to use. Reliable, can be buffed |