|
Thermoplastic type properties Fast cycle time
Excellent physical properties
Prototype and full production with the same properties 1:1 mix
ratio
5030 Typical Properties
|
PROPERTIES |
TEST METHOD |
5030 |
Mix Ratio
by volume A:B |
|
100:100 |
Mix Ratio
by weight A:B |
|
100:90 |
Gel time
100 grams
@ 25°C minutes |
ASTM
D-2971 |
1.5 Min. |
|
Color (cured) |
Visual |
Cloudy White |
|
Hardness Shore Scale |
ASTM
D-2240 |
77 D +3 |
Viscosity mixed
@ 25°C cps |
ASTM
D-4878 |
900 |
|
Heat Distortion Temperature (°C)
66 PSI
264 PSI |
ASTM
D-648 |
86
(°C)
73
(°C) |
DEMOLD NOTE:
Time to reach 80% of cure. For full cure polymers require at least 7-10 days.
Final cure for 3-6 minute gel materials, 3-7 days. Demold and final cure time
can be accelerated with the addition of heat 100-175°F (38-79°C). Size & mass
effect demold and cure times.
HARDNESS NOTE:
The hardness
progresses more slowly in the longer working life systems. The hardness
progression can be accelerated by using the faster version or by curing with
mild heat. Hardness and cure progress will be retarded, slowed down, when the
temperature falls below 70°F.
Directions
For Use
|
