|
Directions For Use
APPLICATION METHOD: Brush or spray
MIXING: none required
SURFACE
PREPARATION:
For
applications where adhesion is desired, the surface must be cleaned
with a clean cloth and solvent, abraded and dried.
Sandblasting and mechanical roughing are the preferred ways of
abrading surfaces to be coated.
Make sure all surfaces are dry and free from moisture. Moisture may
cause contamination and poor adhesion.
FLAMMABLE:
Flammable -
Keep away from open flames. Keep in cool dry place.
STORAGE:
These polymer
systems have a minimum shelf life of six months when unopened.
Both components should be stored in a room temperature dry place.
When not in use, containers should be kept tightly closed.
PRECAUTIONS:
Skin or eye contact with polymers should be avoided. Clean
housekeeping procedures are urged and the use of gloves and/or
protective creams suggested. All polymers, as a general practice,
should be used in well ventilated areas. Spot ventilation is most
effective. Contaminated clothing should be removed immediately and
the skin washed with soap and water or waterless skin cleaner.
Should accidental eye contact occur, wash thoroughly with water and
consult a physician.
|
