A - TAK   Cleans up Cured and Uncured Urethanes & Epoxies

A stripper and clean-up product for Urethanes and Epoxies. 

One component, thin liquid that is low hazard and is non-flammable. 

Most uncured Urethanes and Epoxies can be cleaned up with A-TAK. 
Cured systems can be immersed in A-TAK and will soften or dissolve.
Prolonged immersion and/or heat may be required for some cured polymers.

Color

Clear

Viscosity @ 25 ° C

20 cps

Flammability

Non-Flammable

USE:

Cured Polymer – Immerse in A-TAK until soft or dissolved. Accelerate with heat, up to 150°F, if necessary.

Uncured Polymer – Wipe with a clean rag soaked with A-TAK.

Test A-TAK on non-critical areas FIRST, before use. A-TAK may effect other areas; paint, etc.

STORAGE:

Polymer systems have a minimum shelf life of six months when unopened. 
Both components should be stored in a room temperature dry place.
When not in use, containers should be kept tightly closed.

PRECAUTIONS:

Skin or eye contact with polymers should be avoided. Clean housekeeping procedures are urged and the use of gloves and/or protective creams suggested. All polymers, as a general practice, should be used in well-ventilated areas. Spot ventilation is most effective. Contaminated clothing should be removed immediately and the skin washed with soap and water or waterless skin cleaner. Should accidental eye contact occur, wash thoroughly with water and consult a physician.