Anti-Air    Bubble Release Aid

• An additive for HAPCO'S polymer alloy products, which aids in the release of bubbles caused by entrapped air. 

• Added during the mixing process or can be pre-dispersed in the B side, before proportioning the components.

• Reduces surface tension, which will aid in faster vacuum degassing.
   

• IMPORTANT: Follow directions carefully as to the amounts to be added. 
  Improper amounts of ANTI-AIR can have a detrimental effect on the polymer.

Color

Off White

Viscosity @ 25° C

1000 cps + - 200

Number of components

One

Method #1

Add .0002 to .0008 parts ANTI-AIR to 100 parts of the mixture by weight, mix well.
The normal starting point is .0004 parts per 100 parts mixture by weight

Method #2

Add .0004 to .0016 to the B side by weight, mix well.
The normal starting point is .0004 parts per 100 parts of B side.
If Method #2 is used, the B side should be mixed each time it is used.
In some cases, ANTI-AIR will separate on standing.

STORAGE:

These polymer systems have a minimum shelf life of six months when unopened. Both components should be stored in a room temperature, dry place.  When not in use, containers should be kept tightly closed.

  PRECAUTIONS:

Skin or eye contact with polymers should be avoided. Clean housekeeping procedures are urged and the use of gloves and/or protective creams suggested. All polymers, as a general practice, should be used in well-ventilated areas. Spot ventilation is most effective. Contaminated clothing should be removed immediately and the skin washed with soap and water or waterless skin cleaner. Should accidental eye contact occur, wash thoroughly with water and consult a physician.