Hapco Inc. - liquid plastics and dispensing equipment manufacturer.

GREASE-IT V

PAINTABLE POLYMERIC RELEASE SYSTEM

GREASE-IT V is a paintable, polymeric spray release system that rapidly dries to form an excellent release. In some cases, multiple releases can be obtained.
GREASE-IT V can be used in production applications.
GREASE-IT V can be used on non-porous surfaces and is an excellent release for all epoxies, urethanes, and other polymer alloys.

Typical Properties

Dry time between coats	10-20 seconds
Number of coats	1-2 thin coats
Packaging	18-ounce spray can
Type	Polymeric Silicone for non-porous surfaces
Color	Clear

Advantages

· Paintable

· Easy to use spray can.

· Forms a cured surface and doesn't transfer.

· Good for all epoxies, urethanes and polymer alloys.

Directions For Use

APPLICATION TECHNIQUE:

SPRAY

Shake can thoroughly before use.
Spray a thin, continuous film and allow drying between coats.
Two thin coats are recommended. Do not spray thick coats.

STORAGE:

GREASE-IT V has an unopened shelf life of one year. Keep container tightly closed, when not in use, to prevent solvent evaporation.

PRECAUTIONS:

Skin or eye contact with polymers should be avoided. Clean housekeeping procedures are urged and the use of gloves and/or protective creams suggested. All polymers, as a general practice, should be used in well-ventilated areas. Spot ventilation is most effective. Contaminated clothing should be removed immediately and the skin washed with soap and water or waterless skin cleaner. Should accidental eye contact occur, wash thoroughly with water and consult a physician. Keep away from open flames.