|
Directions For Use
APPLICATION TECHNIQUES:
SPRAY
Spraying with conventional, air pressurized canisters or paint spray equipment
is the most effective means of applying a thin, uniform film of GREASE-IT TWO. Apply two to
four thin coats in opposite directions, drying between each coat.
While spraying, do not dwell in any one area or hold the gun too
close to the surface to avoid "running" and /or excessive build-up. Rather,
deposit a fine mist, with uniform motion. The ideal film thickness can be
recognized by the appearance of a green tint to the applied coating. In addition to drying fast, spray applied GREASE-IT TWO also yields the best part surface because of its
uniformity of application.
(Note:
Residue build-up can occur in the spray canister. To prevent
clogging of the spray gun and/or irregular spray patterns, flush
GREASE-IT TWO from canister and wash after each use.)
BRUSH
Use a high
quality brush and apply with smooth strokes.
For best results dry between coats with the aid of
a hair dryer.
CLEAN UP:
GREASE-IT TWO
may be removed by washing vigorously with water.
STORAGE:
These polymer systems have a minimum shelf life of one year.
When not in use, containers should be kept tightly closed.
PRECAUTIONS:
Skin or eye contact with
polymers should be avoided. Clean housekeeping procedures are urged and the use
of gloves and/or protective creams suggested. All polymers, as a general
practice, should be used in well-ventilated areas. Spot ventilation is most effective. Contaminated clothing
should be removed immediately and the skin washed with soap and water or
waterless skin cleaner. Should accidental eye contact occur, wash thoroughly
with water and consult a physician. Keep away from open flames.
|
