Grease-It™ Wax P

Hard, paste wax release agent that is designed to be brush applied and buffed off to release epoxies, urethanes, sealed wood, metals, etc.

Depending on the surface finish required, Grease-It™ Wax P may be applied and/or buffed off using a cloth, wipe, or a brush

For best results, use with Grease-It™ II , a film forming release, to act as a buffer between the pattern and the film.

Physical Properties

Viscosity	Paste
Color	Tan
Dry time between coats	5 minutes
Number of coats	2-4
Type	Paste Wax
Specific Gravity	.8

APPLICATION TECHNIQUE:

Brush / Wipe

Apply multiple coats using a cloth or throw-away brush.
Use a clean cloth to buff into the surface, moving in a cicular motion.
Apply 2-4 coats, allowing to dry between coats.

STORAGE:
These polymer systems have a minimum shelf life of six months when unopened. Components should be stored in a cool dry place. When not in use, containers should be kept tightly closed.

PRECAUTIONS:
Skin or eye contact with any glass filler should be avoided. The use of gloves, eye protection, and face masks are strongly recommended. All polymers, as a general practice, should be used in well-ventilated areas. Spot ventilation is most effective. Contaminated clothing should be removed immediately and the skin washed with soap and water or waterless skin cleaner. Should accidental eye contact occur, wash thoroughly with water and consult a physician.