Grease-It™ FDG
- Grease-It™ FDG is a Food Grade sprayable release system that rapidly dries to form an excellent release. In some cases, multiple releases can be obtained.
- Specifically formulated to be used with Steralloy™ and Filter-bond™
- can be used on non-porous surfaces and is an excellent release for all epoxies, urethanes, and other polymer alloys
Physical Properties
| Viscosity | Spray can |
| Color | Clear |
| Dry time between coats | 10-20 seconds |
| Number of coats (thin) | 1-2 coats |
| Type | Polymeric Release System |
APPLICATION TECHNIQUE:
Spray
- Shake can thoroughly before use.
- Spray a thin, continuous film and allow drying between coats.
- Two thin coats are recommended. Do not spray thick coats.
STORAGE:
GREASE-IT FDG has an unopened shelf life of one year. Keep container tightly closed, when not in use, to prevent solvent evaporation.
PRECAUTIONS:
Skin or eye contact with any glass filler should be avoided. The use of gloves, eye protection, and face masks are strongly recommended.
All polymers, as a general practice, should be used in well-ventilated areas. Spot ventilation is most effective. Contaminated clothing should be removed immediately and the skin washed with soap and water or waterless skin cleaner. Should accidental eye contact occur, wash thoroughly with water and
consult a physician.